（注：本文是譯文，original text from www.mscsoftware.com)

It is difficult to accurately estimate the cost savings we have obtained through virtual product development (VPD) but we are certain that it amounts to millions of dollars per year across our complete product line.”

我們很難準確估計通過虛擬產品開發（VPD）所獲得的成本節約，但我們確信在整個產品線上，每年節約的成本是數百萬美元。



Solutions for STRUCTURAL ANALYSIS
結構分析解決方案
MSC Software’s highly scalable structural analysis solutions enable engineers to simulate components, assemblies and full vehicles. MSC’s proven technologies help engineers:

...tackle complex problems with confidence:

Analyze structures and their interactions for linear and nonlinear behavior.

Perform complete assembly analysis of powertrain and suspension components.

Improve performance of seals and mounts with accurate nonlinear analysis.

Analyze composite structures subjected to static, dynamic and thermal loads.

...achieve high-fidelity validation:

Obtain system loads for accurate stress analysis.

Improve accuracy of multibody dynamic studies with modal results from finite element analysis.

Conduct co-simulation with multibody dynamics (MBD) and finite element analysis (FEA).

...accelerate analysis of large models :

Perform full-vehicle studies with the help of robust high performance computing and superelements

Perform faster, parallelized dynamic analysis of large models with Automated Component Model Synthesis.

MSC軟件的高度可擴展的結構分析解決方案使工程師能夠模擬組件和整車。MSC的驗證技術幫助工程師：

用信心解決復雜的問題：

分析結構及其相互作用的線性和非線性行為。

完成動力總成和懸架部件的裝配分析。

通過精確的非線性分析提高密封件和支架的性能。

分析受靜態、動態和熱載荷作用的復合材料結構。

實現高保真度驗證：

獲得系統載荷以進行精確的應力分析。

利用有限元分析的模態結果提高多體動力學研究的精度。

進行多體動力學（MD）和有限元分析（FEA）的聯合仿真。

…加速大型模型的分析：

在強大的高性能計算和超單元的幫助下完成整車研究。

用自動化組件模型完成大型模型的動態分析。



Solutions for SAFETY安全解決方案
Testing performance of all of a vehicle’s components and systems working simultaneously is crucial for ensuring the safety of its occupants. MSC’s solutions provide a complete set of technologies for testing control systems, multibody dynamics and explicit dynamics to simulate various driving maneuvers and vehicle behavior to achieve the highest fidelity crash simulations.

...improve collision-related outcomes:

• Gain valuable insight into large strains, deformations and structural failures during crash events involving single or multiple vehicles.

• Model interaction between multiple components and assemblies and the resulting structural and material failure.

• Perform roll stability events to improve predictive capabilities of passive safety simulations.

...prepare for the unexpected:

• Study the influence of fluid pressures during events like hydroplaning and gas tank sloshing.

• Analyze the complex behavior of airbags during deployment under various crash scenarios.

• Conduct MBD-Controls cosimulation to evaluate controls strategies for Automatic Braking Systems (ABS).

• Reduce braking distances by optimizing controls algorithms in the MBD environment to meet Federal Motor Vehicle Safety Standards.

所有車輛部件和系統同時工作的性能測試對于確保其乘員的安全至關重要。MSC的解決方案提供了一套完整的技術測試控制系統，多體動力學和顯式動力學模擬各種駕駛演習和車輛行為，以實現最高逼真碰撞模擬。

改善碰撞相關結果：

在涉及單個或多個車輛的碰撞事件中獲得大的應變、變形和結構失效的有價值的觀察。

對多個組件和組件之間的交互作用建模分析結構和材料失效的結果。

執行滾動穩定性事件以提高被動安全模擬的預測能力。

……為意料之外的事情做好準備：

研究諸如滑行和氣罐晃動之類的事件中流體壓力的影響。

分析在各種碰撞情況下氣囊展開過程中的復雜行為。

進行MD控制協同仿真，以評估自動制動系統（ABS）的控制策略。

通過優化MD環境中的控制算法以滿足聯邦機動車安全標準來減少制動距離。